PowerStop Semi-Coated 6-Lug Brake Rotor and Pad Kit; Rear (03-09 4Runner)Find parts that fit my vehicle

Ceramic pads keeps wheels dust-free & Semi-Coated rotors maintain that new car look
Rotors are coated for corrosion resistance on the hat, outer edges and vanes
Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
Multi-layer rubberized shims provide virtually noise-free braking
Rotors are 100% dynamic mill balanced and manufactured to strict tolerances for DTV and runout for smooth, quiet performance
Installation Tips
Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
Before installing the rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
Apply brake lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function

Fitment:

• 2003 Toyota 4Runner
• 2004 Toyota 4Runner
• 2005 Toyota 4Runner
• 2006 Toyota 4Runner
• 2007 Toyota 4Runner
• 2008 Toyota 4Runner
• 2009 Toyota 4Runner

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov