Morimoto BigBanger Pod-Link

Nice lights

These lights changed the look of my truck. It looks brand new. They were expensive but worth the money. The only negative I have is that I paid to have an Extreme Terrain affiliate install them, which was convenient. The only thing is I don't think they were aimed and are a little difficult to get to once installed.

Amazing!!!

Super easy install! Just YouTubed it. Looks way better than stock! Loved the price and the product! I would definitely recommend this if you are looking for a cheap and easy upgrade!

Totally Awesome

I bought my husband the Morimoto headlights and he LOVED them. It gives his truck a completely different look.

Tundra fogs

Good quality and lighting but had to hard wire because the connector that were supplied didn’t allow a good connection..

Great updated look!

These tail lights give my 2017 Platinum a refresh that looks oem. They are brighter and the led pattern is definitely makes it look like something built in the 2020s. Morimoto makes a very good product.

Awesome Taillghts

Great quality, fit & easy install! My truck came with the LED headlights that have a black housing & clear lens, so the stock red lens taillights looked terrible. These make a world of difference and complete the look. I love the sequential turn signal feature!

GREAT PRODUCT

BUY THIS IF YOU WANT COOL SLICK LOOK ON YOUR PICKUP. THAT OEM THIRD BRAKE LIGHT LOOKS BAD.

Great Replacement Lights*

I bought these to replace the puddle lights on my Tundra. They are bright! The housing fit on them is a perfect replacement to my OEM lights. Only *minor* issue I had was the male connectors were slightly smaller than the OEM female connectors. I thought about just crimping them down, but a buddy suggested wrapping the male connectors in a little bit of foil. Worked like a charm.

2015 Tundra

I like them. So far they work Great!! I've tried other lights, but these work the Best.

Read Review and Research.

Pros Great light I have changed all my OEM lights to Morimoto I love them and they are worth every dime. Now this third brake light installation is a giant PIA. I have turned a wrench or two in my life. But look close. The videos you may see have screws you remove from the outside pull the light out and plug and play and place screws back in. Now if that’s the case sure 20 mins. The ones that have bolts you put in on the inside of the light. A whole different story. I’m going to share the link that the agent helped me with cause I went on Morimoto’s site and didn’t find this. Read Read Read. Have small hands cause taking the nuts off the bolts are a PIA you have to remove a good portion of the head liner in the rear. Then make sure you get those parts and don’t drop the nuts inside the roof frame. Then once those are off you go to the outside and make sure you break the seal of the foam and then when you remove the housing wedge your tool in the middle lower section and pop the clip while pulling the light. Now make sure you have a plastic scraper blade to remove the excess glue and seal. That was a pain and trying not to mess the paint up. Once that’s done clean the area and make sure it’s dry. Then set the light in and I used masking tape to hold in place if not have another hold the light from the outside. If not the light will drop out. Yes I learned the hard way. I also put a small bead of silicone under the upper lip portion underneath to creat and better seal. When the nuts are tightened you will possibly have a small very small open area of the roof and the light. So I did the small seal of silicone. Clear and then wiped but made sure the seal would block any water or moisture getting to the inner seal. I would give it a 5. But the installation instruction videos don’t share any of this at all. The lights though are very bright and work well and I have the adapter for the brake portion of the light and the white backup lights are very bright as well. Here is the link for the true instructions. READ READ READ. https://www.morimotohid.com/core/media/media.nl?id=13687336&c=5129608&h=-MPkzuCXkbWn11Z6z7pNTUfVM8GWbTUu801kikDMi2xmwAfM