Powerful Fuel Pumping Capabilities. Enhance your truck’s fuel pumping capacity to match an upgraded fuel tank by using this Tundra fuel transfer tank pump. This pump can move up to 450 LPH of fuel and is made to work with Holley performance fuel cells. This high-performance fuel pump is built to mount directly onto a fuel cell and to provide reliable performance.

Surface Mount Installation. This Holley Fuel pump is designed to install on the surface of your professional fuel cell. The pump bolts firmly into position and directs the flow of fuel from its installation point. This pump is locked in position using 12 bolts and remains firmly in position through intense driving conditions.

Built from Anodized Aluminum. This pump is designed from anodized aluminum and has an aggressive black finish. The pump is weather-resistant and tough enough to handle extreme pressures during operation.

Simple Installation. Adding all the Holley fuel cell components and fuel lines is a complicated process but adding a fuel pump to a pre-existing system is simple to do. Just mount the pump to the mounting hole on your fuel cell, lock the bolts down and connect the fuel line as well as the power connection to activate your new pump. It’s recommended that you work with a professional to get your fuel system installed properly.

Application. This Tundra fuel transfer tank pump works with select Holley performance fuel cells. Verify that you have a compatible cell with a 12-bolt mounting flange before getting this pump for your ride.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov