2-Inch Receiver Hitch Slim Adjustable Channel Mount; 3-3/4-Inch Drop (Universal; Some Adaptation May Be Required)Find parts that fit my vehicle

Perfect fit and finish

Good looking and easy to install. Good value. Instructions are OK and with the YouTubes available made for a painless install.

15 degrees!

I installed my hitch when it was 15 deg. outside. A hint- take the 1/2 bolts and spacer and put them together with some adhesive and set upside down overnight, it makes it easier to slide them through the crossmember with the fishing wire.

Easy to use.

This is the easiest to use for a secure fit I have found so far. I can use it for one bike by just leaving the parts for the second bike off or adding those parts in under a minute for the second bike. Putting the bike in the clamps takes only seconds, including locking the hold hook in place. I've used this off-road many times and it holds the bike very securely. If you have it on a jeep with a spare tire, I strongly recommend a heavy-duty hitch extender (which are not very expensive). Note: the rear door will not open with this rack attached.

Great hitch

It was such a easy install maybe 15 minutes max and the product works great

Front receiver for a jeep wrangler

It was very easy to install and well built. I would recommend this to anyone that is thinking about a plow for there jeep

Tow hitch

Very well constructed. Same weakness as my off road bumper in that no safety chain accommodations. By adding chain loops it is a complete package.

Easy install

Everything went right together as planned. No fuss or anything

Nice but you need extender

Welds don’t line up quite flush was a pain. Wear glove and use a few wrenches to hold bolts from spinning. Nice clean design.

Work Done

exact fit easy to install look good and already test Work done

EXCELLENT PRODUCT

Great purchase, fit my needs and worked well, I would recommend highly