How to Install XT Graphics On The Move Star Kit - Matte Black (87-17 Wrangler YJ, TJ, JK) on your Jeep Wrangler

1. Carefully open the package using a box cutter or knife (Figure A). 

2. Ensure that all decals and squeegee are included (Figure B).

3. Using an empty spray bottle (Figure C), combine a generous amount of soap and water. 

4. Spray a generous amount of soap/water mixture onto the surface intended for the decal. 

5. Peel away the backing, exposing the adhesive side of the decal (Figure E). 

6. Spray the soap/water mixture onto the exposed adhesive side of the decal (Figures F). This will allow for maneuverability when positioning the decal. 

7. Position the decal where it will be positioned (Figure G). 

8. Using the squeegee, push soap/water mixture out, thus securing the decal. When using the squeegee, begin from the center (Figure H) and moving outward. 

9. Once all soap/water mixture is pushed out, peel away remaining backing at a sharp angle (Figure I). 

10. Follow steps 4 through 9 to install remaining two stars.