Warrior Products Rear Corners; Aluminum Diamond Plate (97-06 Jeep Wrangler TJ)Find parts that fit my vehicle

Good Insurance

Bought older Jeep & tailgate hinges were bad. Replaced with used ones but realized the stops are a weak link & didn't wanna risk breaking the tail light again so installed this strap as a safety measure to assure I wouldn't swing the gate too far. Works perfect & an easy install with just your average drill kit. Money well spent & easily adjustable to stop gate where ever you want it to.

Looks better than factory

Product arrived in a timely manner and appears as advertised. Installation was simple, with normal hand tools. Directions were clear and easy to follow. Looks much nicer than the faded factory piece. I would recommend this product.

JL Cowl cover good, needs improvement

The cowl comes powder coated, and is straight forward for install. Be aware that if/ when you install it that you think about future issues with wiper arms. If you put the rivets in and you need access, you will to drill them out. Instead I used screws in case I need access for later. Also I had a local shop paint it the same color as my OEM paint. With the original faded plastic gone it cleans up the look nicely.

good product

it work will well people should by only my friend told to by it i should get two years ago

As far as the product it seem well made. I only rated it 3 stars because of the rivet's color coming off. Its a shame that $2 worth of fasteners (rivet's) bring down the product

So frustrating

I love the aesthetic of this piece. It certainly offers a considerable upgrade compared to the plastic OEM cover. The rivets they supply are abysmal. They are the cheapest of quality and the three I used snapped midway up and had to be drilled. Besides being low quality, riveting would be a terrible idea for inviting rust. I ended up drilling, anchoring with rivnuts, and purchasing higher quality fasteners. About a week later, the cover started to rust. It’s a great piece that the manufacturer has decided to burden with unnecessary quality flaws.

Diamond Cowl Cover

Overall I like the product. The material seems well made and not flimsy. The only reason I gave it 4 stars was because of the rivet gun and when it cuts the pin it scratches some of the black on the pin itself. Not a huge deal and can touch up. I'm not handy and it was a fairly easy install. I did need to buy a rivet gun (Amazon for $15) and auto trim removal kit (Amazon for $7.50). It does not fit perfectly into the cowl but that is by design I believe. Just an FYI.

Big Improvement!

Such a big improvement over the factory faded black plastic cowl that I replaced. Wasn't sure about aluminum vs black finish but glad I went with polished aluminum. I'm an accountant and I was able to install it! Hardest part was removing my wiper arms. Need a drill and rivot gun that will take 3/16 rivots. Very pleased!

cowl cover

The pop rivet's used to install the cowl were balck and in a couple days' time the heads turned to a copper color. Now I have to touch up with balck paint.

great product

amazing product great for outdoors and it doesn’t not get in the way of anything.