UPR Products Billet Oil Catch Can; Satin (20-24 3.6L Jeep Gladiator JT)Find parts that fit my vehicle

Brand New UPR Signature Series Billet Catch Can System with Round Mounting Bracket for your 2018 to Present JEEP Wrangler and Gladiator with the 3.6 Liter engine. This Catch Can was developed to out perform all the other 2 chamber catch cans with a patented internal diffuser system that forces the oil to be released into the catch can from a lower chamber then the fresh air can exit through the upper chamber. This is because all the traditional 2 chamber catch cans have two chambers side by side and with a screen that separates them. Side by Side chambers with a simple screen or honeycomb filter allow oil to be sucked right across and out the exit port of the catch can.


Most of the top brands out there are what is called 2 chamber pull through catch cans as they all allow as much oil to be pulled through them as they collect and this is why they can have such small oil capacities and be drained so infrequently. With the UPR Catch Can you have to check them every 500 miles to maintain the oil level. Wheres other catch cans usually say to check them every 2000 to 3000 miles and you should be fine. UPR takes pride in their products and always strives to deliver the best looking and performing products.

All UPR Catch Cans are machined from 6061 Billet Aluminum and use forged aluminum fittings along with Viton O-rings and the highest quality Braided Hoses on every model. We don't sell you a catch can and with all the rubber or plastic hoses and plastic fittings and then tell you to get the best you have to upgrade your hose and fittings. With UPR it all comes STANDARD at no extra cost!

This setup was designed for all the JEEP enthusiasts to eliminate the dreaded Blue Smoke Screen when off roading or rock crawling.

You will see improved MPG and Improved Performance throughout the Entire RPM range

THIS PART DOES NOT CARRY AN CARB EO NUMBER, AND THEREFORE IS FOR RACING / OFF ROAD USE ONLY. NOT FOR SALE OR USE IN CALIFORNIA DUE TO CARB/EMISSIONS. ALL CALIFORNIA ORDERS WILL BE CANCELLED AND REFUNDED


Product Features

Show Quality Finish
5/8" Black Billet 90 fittings
Can measures 4.50" x 2.5"
Super Easy 20-30 minute install
5/8" Oil Resistant Hose included
Billet intake Mounting Bracket System
Improves Fuel Economy & Performance
High Quality CNC Machined Billet Aluminum
Multi-Stage Patented Diffuser Prevents Oil from Entering Intake
Available in Satin, Black, Blue or Red - Select Finish Above




Installation:
Installs in 20-30 minutes or less.

The UPR Oil Catch Can features a three chamber design CNC machined from 6061 Billet Aluminum unlike some of our competitors models that are single chamber tanks that don't properly trap the oil or debris.

Fitment:

• 2020 Jeep Gladiator
• 2021 Jeep Gladiator
• 2022 Jeep Gladiator
• 2023 Jeep Gladiator
• 2024 Jeep Gladiator

Details

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov