UPR Products Plug N Play Oil Catch Can; Black (22-24 Bronco Raptor)Find parts that fit my vehicle

The NEW UPR Plug N Play ™ catch can kit is the perfect fit for your new Bronco 2.3!
In Mid 2021 Ford moved the vacuum fitting from under the intake manifold to on top of the manifold. If you have a 2021 model year look at the picture showing the placement for the 21 and newer fitting then select the appropriae kit..

Easy to install, and easy to service too with UPR's Billet bracket technology and Plug N Play ™ quick release factory style fittings. You can remove this kit to return the vehicle back to stock in just a few minutes if needed. With its extremely efficient compact design and incredible looks, We went the extra mile to ensure you get the best quality components. This kit is 100% Modular and can be fully disassembled or emptied and cleaned in seconds. It utilizes UPR Braided Hose and Billet Hose Ends to give you the Strongest and Best Performing Setup Possible- No cheap stock lines here that have been cut and spliced on or hardware store rubber hose! Featuring the New UPR Plug N Play ™ Catch Can Fittings, you can empty the can without removing the catch can lines from your engine. (UPR Exclusive Push Button Fittings) We have hundreds of hours testing our new Multi-Stage Oil Separator to ensure proven results will exceed your expectations. 4 ounces will give you the needed oil capacity to be sure the catch can does not overfill.

This new patented design is the most advanced Internal function from coalescing to condensing every aspect was engineered properly. It cannot be compared or confused with units that have side by side inlets and outlets with ineffective flimsy filters or air compressor filters to keep the cost down and never take into account how critical the separation process is. At UPR make sure that this feature and process of the catch cans performance is protected with the best diffuser systems available. UPR's Patented Multi-chamber diffuser technology is featured in every UPR catch can to capture and filter all the oil vapor and trash from getting into your air intake tract. This is the most critical feature of any catch can system. Manufactured from Domestic T-6 6061 Aluminum bar stock and finished off using only the best Diamond cutters to exceed your expectations of what a superior product should fit and look like.

Every UPR Catch Can is designed, tested and manufactured in the USA. UPR is the largest aftermarket catch can manufacturer in the country. Continually improving our designs to stay ahead of the competition and give you the cutting edge technology of tomorrow today. We are so confident we offer an unconditional warranty on our products to let you know you can always count on UPRproducts. We do not use plastic catch can fittings like the competition to ensure you will never have any cracks or failures that cheap plastic fittings suffer from.

In Mid 2021 Ford moved the vacuum fitting from under the intake manifold to on top of the manifold. If you have a 2021 model year look at the picture showing the placement for the 21 and newer fitting then select the appropriae kit.

THIS PART DOES NOT CARRY AN CARB EO NUMBER, AND THEREFORE IS FOR RACING / OFF ROAD USE ONLY. NOT FOR SALE OR USE IN CALIFORNIA DUE TO CARB/EMISSIONS. ALL CALIFORNIA ORDERS WILL BE CANCELLED AND REFUNDED


Product Features
Show Quality Finish
UPR Plug N Play ™ fittings
Prevents Oil from Entering Intake
Exclusive 4 Stage Design Traps Oil
Innovative Diffuser Tube and Chamber
Can measures 2.5 x 5" 5oz Capacity
High Quality CNC Machined Billet Aluminum
1/2" Oil Resistant Continental Braided Hose included
Improves Fuel Economy, Throttle Response & Performance
Black Anodized Finish


Installation:
Installs in 30 minutes.



Fitment:
2021 2022 2023 2024 Ford Bronco 2.3L Ecoboost

Fitment:

• 2022 Ford Bronco
• 2023 Ford Bronco
• 2024 Ford Bronco

Details

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov