TrailRax Modular Half Roof Rack with Standard Wind Deflector (21-24 Bronco 4-Door)Find parts that fit my vehicle

The long-awaited Ford bronco Roof Rack that works with the TrailRax Pak Rax! This Aluminum roof rack offers an assortment of ways to mount gear and tools for your next adventure. We use 5051 3/16" aluminum for the main panels that give extreme rigidness and durability for all the gear you plan to equip your Bronco with. We also have a large number of accessories available with this roof rack that will allow endless combinations and possibilities for the end-user.

Our Aluminum extrusions that come with the rack are anodized black and cut to length with the most precision possible. The extrusions are made locally here in Utah and have a high-stress rating as well as deflection rating giving the user the best load capacity possible.

Our one-piece side panels for the roof rack offer extreme durability and capacity to the rack itself. It also offers a 90-degree bent channel that gives the end-user an area to mount even more accessories. These panels also come precut with slots to add more extrusions and tools to the side panels, offering more modularity and customization.

The mounting system uses a clamping system that clamps onto the OEM Ford MIC hardtop that offers an easy bolt-on design. The front of the full-length roof racks mounts into existing studs on the windshield offering a very rigid place to distribute loads on the roof rack. Our Pak Rax for the Ford Bronco mounts directly into the side panel and offers some weight distribution from the rack down to the body of the car which puts less stress on the MIC Hardtop allowing for higher capacity.

Our TrailRax Modular Roof Rack line is a great option for the all-out overlanders or desert racers as well as the entry-level overlanders or off-roaders. This rack gives the end-user the ability to upgrade or add to their roof rack as they need.

MIC Hardtop is required for the product.

Specs:

Overall height added to your Bronco- 3.845" from the center of the hardtop or 3.345" from the highest point of the hardtop (outer edges).
Static load rating for half-rack: 300 lbs evenly distributed across the rack
Dynamic load rating for half-rack: 150 lbs evenly distributed across the rack
These ratings are rated and measured WITH optioned Pak Rax. The Pak Rax allows for the distribution of weight to the body of the Bronco allowing the best stability and carrying load capacity.
Attributes of the TrailRax Modular Roof Rack for the Ford Bronco:

Higher weight capacity than the OEM roof rack and others
Easy bolt-on install
Wind deflector to minimize annoying wind noise issues
Majority Aluminum construction to avoid any rust
Low profile to fit in garages and more
Offer the ability to remove the front and middle MIC hardtop panels
Half-rack will mount to the rearmost portion of the MIC hardtop and will not exceed past the middle panel
Brand's and Products recommend using with our TRMR Rack:

While you are not limited to these brands, these brands worked with us along the way in designing the rack. This gives us and them the ability to work with their products within the design to make sure everything fits properly and works together in harmony. If you are looking to accessorize your TRMR Rack, look no further than these brands if you want high-quality products that fit directly to your TRMR Rack with no headaches.

Fitment:

• 2021 Ford Bronco
• 2022 Ford Bronco
• 2023 Ford Bronco
• 2024 Ford Bronco

Details

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov