Valve Stem-Mounted TPMS Sensors with Rubber Valves; Set of Five (13-6/7/21 Jeep Wrangler JK & JL)Find parts that fit my vehicle

Turns Off Dash Light. Your Tire Pressure Monitoring System (TPMS) alerts you when the pressure drops to an unsafe limit. This a great safety feature, but if you plan on upgrading to a new set of Wheels/Tires you will need to install a new sensor in each wheel, if not you will have an annoying dash light constantly reminding you that your sensors are missing. This rubber stemmed replacement TPMS sensor prevents unwanted dash lights for the factory performance you're used to.

No Programming Required. This TPMS Sensor is designed to be on the same 433mhz frequency as the original stock sensor so it doesn't need to be reprogrammed. If not automatically recognized, just use the OEM relearn procedure.

Application. These replacement Valve Stem-Mounted TPMS Sensors are specifically designed for use on 2013-2021 Jeep Wrangler JK and JLs.

Chrysler equivalent part# 5602-9398AB, 56029398AA

Technical Note. Please check the manufacturing date of your vehicle on the sticker located inside the driver's door jamb. If your vehicle was manufactured before 6/7/2021, these are the correct TPMS sensors for you. TPMS is monitoring system your vehicle uses to keep an eye on your tire pressures. It does this with sensors mounted to your wheels, inside your tire. If selected, our team will pre-install these so you won't have to deal with any pesky tire pressure lights showing up on your dash, or taking your factory wheels to a shop to have your original sensors swapped over to your new wheels.

Fitment:

• 2013 Jeep Wrangler
• 2014 Jeep Wrangler
• 2015 Jeep Wrangler
• 2016 Jeep Wrangler
• 2017 Jeep Wrangler
• 2018 Jeep Wrangler
• 2019 Jeep Wrangler
• 2020 Jeep Wrangler
• 2021 Jeep Wrangler
• 2022 Jeep Wrangler
• 2023 Jeep Wrangler
• 2024 Jeep Wrangler

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov