Tape-On Rain Guards; Front and Rear; Smoke (17-24 Titan Crew Cab)Find parts that fit my vehicle

Grill Guard

The only problem with this Grill guard was it block all my front crash sensor's. They no longer work. The dealer had no idea how to fix. The only option I have is take it off. I have to switch the control off each time I start the truck or it constant beeping and warning lights flashing on the dash. So I turn them off. No longer have front crash protection. Any one have a idea. tbearbooker@yahoo.com

Good looking Bull Bar

More stream line than other bull bars with skid plates. Little difficult to install but can be done w/o removing bumper. Added aftermarket fog lights at same time.

Grille Guard

This project was a little difficult because of the poor description of location of attach points. Overall, my brother and I got it done in about 4 1/2 hours. Very rugged and sturdy.

Side steps

I got the side steps in the estimated day of delivery. Which I love when things come in on time. Nothing was missing and they look great. Only took maybe 2 hours to install.

Max T Bull Bar

Had to remove brush guard and cut slots for install but looks great!

Great looking addition to the Gladiator!

Love the look of the classic roll bar, especially the way it works together with a tonneau cover. This way I can still store valuables underneath and keep things safe. Installation was pretty straight forward with only a couple of minor things that weren't covered in the instructions. Only thing that was a slight disappointment, and that's no fault of the manufacturer, is my tonneau cover doesn't allow me to get two folds out of it before it hits the back of the roll bar. I've hear of others being able to get a second fold up but where mine bends, the second hinge point is under the rear end of the roll bar bracket. Perhaps I can make some adjustments to where my roll bar and cover sit to make everything work together better. Overall, I really like the new look it gives my Gladiator. I'm going for a retro/Scrambler look, so some round KC lights or something similar on the roll bar are probably next.

Good enough

Quality is what you'd expect at this price point. Would have given 5 stars had the description included the phrase, "some drilling required" before purchase. Keep in mind you will need a 1/2" drill bit to complete the install. Other than that, an overall easy project.

Grand Cherokee running boards

The running boards look good, and well made. I had a local company install them, but it took extra time, because they had to notch the molding on the bottom of the car for a proper fit. They are sturdy and my wife can get in and out of the car better. I can't tell yet how slick the rubber on the running board is going to be when they get wet from the rain.

Hit a pig or two

Installed real easy. made its debut on a 20lb hog. Brackets held up good. Only thing i waould complain about is highway driving. Still looks solid but running past 2200rpm it seems to shake a little. Secondary brackets are a little flimsy, but do manage with little structural places to mount.

Great bar.

Fit perfectly and easy to install. Looks great with my tire mount.