Installation Time
(approx) 2 Hours
Difficulty Level:
Light to Moderate mechanical skill required.
FREE 1 to 3-Day Delivery on Orders $119+ Details
$255.99 kit
Saved - View your saved items
We're sorry. We couldn't save this product at this time.
or use
Features, Description, Q&A, Specs & Installation
PreRunner Prepped. Taking your 2007-2018 Jeep Wrangler JK to the next level for the trail means that you're going to need to upgrade its suspension. And one of the best ones you can equip is a PreRunner suspension. Thankfully, the folks at Teraflex are here to ensure that you're going to have the best prep possible. So do yourself a favor and grab the Teraflex PreRunner Component Kit.
Built to (Pre)Run. From the front and rear coil spring retainers, to the bolt washers and SpeedBump jounce tube braces, this kit has all you'll need to completely cover your suspension to prep it for a PreRunner suspension. However, the limit straps included with this kit are built to work only with 3" TeraFlex-tuned Fox or Elka shock absorbers. Doing otherwise could cause damage to your Wrangler's suspension.
Installation. This PreRunner component kit requires hand tools and a car lift or jack stands. Mechanical expertise is required, and it should take around four hours to install. Please have this installed professionally if you're unsure of your ability to do this yourself.
Limited Lifetime Warranty. Teraflex ensures their products will be free of material and manufacturer's defects for as long as you have them installed on your Wrangler JK and keep them properly maintained. Restrictions apply, see full warranty for more details.
Application. This Teraflex PreRunner Component Kit is designed to fit all 2007-2018 Jeep Wrangler JK models. Ensure correct model before purchase.
Fitment:
Teraflex 4957000
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Installation Info
Installation Time
(approx) 2 Hours
Difficulty Level:
Light to Moderate mechanical skill required.
What's in the Box
Note: The limit straps are designed to be used with the 3” TeraFlex tuned Fox or Elka shock absorbers. Using a different shock and/or length is not advised.