Contents
Shop JK Drivetrain
Shop for replacement or upgrade drivetrain parts for your Wrangler JK, today!
Guaranteed Free Delivery by 12/24! available on most items - Details
Talk to a Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Jeep Wrangler JK Drivetrain Torque Specs
Manual Transmission (NSG370) Torque Specs
When removing the transmission, do not attempt to unbolt it without having proper support from a jack. It is recommended to have the transmission secured to the jack before beginning removal.
|
Description |
Specification |
|
|---|---|---|
|
Drain Plug |
22 ft-lbs |
|
|
Fill Plug |
22 ft-lbs |
|
|
Shift Tower Bolts |
10 ft-lbs |
|
|
Shift Lever Bolt |
33 in.lbs |
|
|
Housing Bolts |
20 ft-lbs |
|
|
Input Shaft Retainer Bolts |
80 in.lbs |
|
|
Bearing Retainer Bolts |
88 in.lbs |
|
|
Shift Rail Support Bolts |
71 in.lbs |
|
|
Idler Gear Shaft Bolt |
15 ft-lbs |
|
|
Countershaft Bolt |
74 ft-lbs |
|
|
Transmission Top Four Bolts |
30 ft-lbs |
|
|
Transmission Side Two Bolts |
50 ft-lbs |
|
|
Transmission Bottom Four Bolts |
40 ft-lbs |
|
|
Crossmember Bolts |
35 ft-lbs |
|
|
Transmission Mount Bolts |
35 ft-lbs |
Automatic Transmission (42RLE) Torque Specs
3.8 Liters of Mopar ATF 4 should be used in this transmission. It has 4 forward gear ranges.
|
Description |
Specification |
|
|---|---|---|
|
Converter To Flexplate Bolt |
65 ft-lbs |
|
|
Fluid Filter To Valve Body Bolt |
45 in-lbs |
|
|
L/R Clutch Retainer To Case Bolt |
45 in-lbs |
|
|
Adapter/Extension Housing Bolt |
40 ft-lbs |
|
|
Manual Valve Lever To Manual Valve Bolt |
45 in-lbs |
|
|
Oil Pan To Case Bolt |
14.5 ft-lbs |
|
|
Oil Pump To Case Bolt |
265 in-lbs |
|
|
Park Sprag Retainer Bolt |
40 in-lbs |
|
|
Reaction Shaft Support Halves Bolt |
250 in-lbs |
|
|
Solenoid/Pressure Switch Assy To Valve Body Bolt |
50 in-lbs |
|
|
Torque Converter Housing To Engine Block Bolt |
95 ft-lbs |
|
|
Valve Body To Case Bolt |
105 in-lbs |
|
|
Valve Body To Transfer Plate Bolt |
45 in-lbs |
|
|
Cooler Line Fitting |
35 ft-lbs |
|
|
Output Shaft Nut |
200 ft-lbs |
|
|
Pressure Tap Plug |
45 in-lbs |
|
|
Input Speed To Case Sensor Bolt |
80 in-lbs |
|
|
Output Speed To Case Sensor Bolt |
80 in-lbs |
Automatic Transmission (545RFE) Torque Specs
This transmission has 5 forward gear ranges and uses ATF 4.
|
Description |
Specification |
|
|---|---|---|
|
Fitting, Cooler Line At Trans |
155 in-lbs |
|
|
Torque Converter Housing To Engine Upper Four Bolts |
30 ft-lbs |
|
|
Torque Converter Housing To Engine Lower Four Bolts |
40 ft-lbs |
|
|
Transmission Collar |
50 ft-lbs |
|
|
Torque Converter To Flexplate Bolts |
23 ft-lbs |
|
|
Crossmember Nuts and Bolts |
50 ft-lbs |
|
|
Flexplate To Crankshaft Bolts |
55 ft-lbs |
|
|
Clevis Bracket / Rear Support Bolts |
35 ft-lbs |
|
|
Converter Housing Bolts |
50 ft-lbs |
|
|
Oil Pan Bolts |
105 in-lbs |
|
|
Primary Fluid Filter Screw |
40 in-lbs |
|
|
Transfer Case Nuts |
26 ft-lbs |
|
|
Oil Filter, Cooler Return |
84 in-lbs |
|
|
Oil Pump Bolt |
250 in-lbs |
|
|
Oil Pump Body To Cover Bolts |
40 in-lbs |
|
|
Plate To Oil Pump Body Screw |
40 in-lbs |
|
|
Valve Body To Case Bolt |
105 in-lbs |
|
|
Pressure Test Port Plug |
45 in-lbs |
|
|
Reaction Shaft Support Bolt |
105 in-lbs |
|
|
Valve Body To Transfer Plate Screw |
50 in-lbs |
|
|
Solenoid Module To Transfer Plate Screw |
50 in-lbs |
|
|
Accumulator Cover Screw |
60 in-lbs |
|
|
Detent Spring Screw |
40 in-lbs |
|
|
Input Speed Sensor Bolt |
105 in-lbs |
|
|
Output Speed Sensor Bolt |
105 in-lbs |
|
|
Line Pressure Sensor Bolt |
105 in-lbs |
|
|
Extension Housing Bolt |
40 ft-lbs |
|
|
Manual Valve Cam Retaining Screw |
40 in-lbs |
|
|
Manual Selector Shaft Retaining Screw |
250 in-lbs |
|
|
Manual Selector Shaft Cross Bolt |
140 in-lbs |
Transfer Case (NV241 GENII) Torque Specs
This transfer case uses around 2 quarts of ATF 4. depending on what model your Wrangler is, you will have a 2.72:1 gear ratio in 4wd-low.
|
Description |
Specification |
|
|---|---|---|
|
Detent Plug |
12-18 ft-lbs |
|
|
Drain/Fill Plug |
15-25 ft-lbs |
|
|
Extension Housing Bolt |
12-18 ft-lbs |
|
|
Case Half Bolt |
15-24 ft-lbs |
|
|
Oil Pump Screw |
8-12 ft-lbs |
|
|
Front Companion Flange Nut |
90-130 ft-lbs |
|
|
Range Lever Nut |
20-25 ft-lbs |
|
|
Sector Support |
20-30 ft-lbs |
|
|
Mounting Nuts |
20-30 ft-lbs |
|
|
Position Sensor |
16-25 ft-lbs |
Transfer Case (NV241OR) Torque Specs
This transfer case is used in rubicon models for JK Wranglers and uses around 2 quarts of ATF 4. In 4wd-low it has a 4:1 gear ratio ratio.
|
Description |
Specification |
|
|---|---|---|
|
Detent Plug |
12-18 ft-lbs |
|
|
Drain/Fill Plug |
15-25 ft-lbs |
|
|
Rear Extension Bolt |
12-18 ft-lbs |
|
|
Front Input Retainer Bolt |
16 ft-lbs |
|
|
Case Half Bolt |
15-20 ft-lbs |
|
|
Front Yoke Nut |
90-130 ft-lbs |
|
|
Rear Companion Flange Nut |
190-230 ft-lbs |
|
|
Shift Lever Bolt |
15-25 ft-lbs |
|
|
Mounting Nuts |
20-30 ft-lbs |
|
|
U-Joint Bolts |
17 ft-lbs |
|
|
Sector Support |
20-30 ft-lbs |
|
|
Transfer Case Position Sensor |
16-25 ft-lbs |