2 to 3-Inch Receiver Hitch 5/8-Inch Hitch Lock

Secure Trailers and Tow Vehicles. To ensure the safety of your towing vehicle or trailer, this Tacoma 2 to 3-Inch Receiver Hitch with a 5/8-Inch Hitch Lock is a perfect choice. For attaching a ball mount or other accessory, a hitch lock is similar to a hitch pin and clip. It inserts into the fastener hole on the side of the receiver tube. In addition to the strength provided by this hitch pin, it gives even more security for your ball mount's attachment. Your trailer hitch can be secured, preventing any thefts or accidental detachments.

High-Strength Steel Construction. An integral deadbolt and 5/8-Inch pin diameter allow it to be used with receiver tubes measuring 2-Inch, 2-1/2-Inch, or 3-Inch. The Tacoma 2 to 3-Inch Receiver Hitch has a sturdy, square-shaped lock mechanism and a curved handle for better holding. They can be activated with a simple quarter-turn of the key. Watertight dust caps are also included to keep out the rain and keep corrosion at bay.

Easy Installation. This receiver hitch lock attaches to your towing vehicle's receiver by sliding crosswise into the opening. When the trailer hitch is attached, it slides into a specific hole and then locks in place. Then, you remove a rubber cap covering the keyhole, insert the provided key, and turn to open or lock the pin.

Limited Lifelong Warranty. The Tacoma 2 to 3-Inch Receiver Hitch with a 5/8-Inch Hitch Lock has a limited lifelong warranty.

Application. This hitch lock fits 2-Inch, 2-1/2-Inch, or 3-Inch receivers.

Installation Difficulty. Installing this hitch lock is pretty straightforward, taking 15-20 minutes to attach.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov