Steinjager 2.50-Inch Suspension Lift Kit; Pinky (07-18 Jeep Wrangler JK)Find parts that fit my vehicle

MAKE: JEEPMODEL: WRANGLERYEARS: 2007-2018KIT INCLUDES THE FOLLOWING:(2) 2.5 INCH FRONT LIFT COILS(2) 2.5 INCH REAR LIFT COILS(2) FRONT LOWER CONTROL ARMS WITH POLY BUSHINGS(2) FRONT UPPER CONTROL ARMS WITH POLY BUSHINGS(2) REAR LOWER CONTROL ARMS WITH POLY BUSHINGS(2) REAR UPPER CONTROL ARMS WITH POLY BUSHINGS(1) ADJUSTABLE REAR PANHARD BAR(2) ADJUSTABLE FRONT END LINKS(2) ADJUSTABLE REAR END LINKSMADE IN THE USA: OUR SPRINGS, CONTROL ARMS, PANHARD BAR, AND END LINKS ARE MADE IN THE USA. THAT MEANS OUR STEEL CUTTING, BENDING, MACHINING, WELDING, POWDER COATING, ASSEMBLY AND PACKING ARE ALL DONE IN THE SAME FACTORY.WARRANTY: LIFETIME (ORIGINAL OWNER) ON CONTROL ARMS AND PANHARD BAR. ONE YEAR ON END LINKS, BUSHINGS AND SPRINGS.APPLICATION: STEINJÄGER LIFT KITS ARE FOR OFF-ROAD USE ONLY.DISCLAIMER: DUE TO THE NATURE OF POWDER COAT PROCESS, THE SPRINGS WILL HAVE A SLIGHT AREA THAT IS BARE METAL (IE: WITHOUT PAINT) DUE TO HOW THE PARTS ARE HUNG DURING THE POWDER PROCESS. ONCE INSTALLED ON YOUR JEEP, YOU WILL NOT BE ABLE TO SEE THIS 'PAINT HANG SPOTS'. IF YOU ARE CONCERNED ABOUT THEM RUSTING, YOU MAY APPLY TOUCH UP PAINT AND/OR OTHER RUST PROHIBITIVE COATINGS; DOING SO WILL NOT DAMAGE OR HARM THE SPRINGS. NOTE: WE WILL NOT ACCEPT RETURNS OVER THIS UNAVOIDABLE PART OF THE POWDER COAT PROCESS.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov