CREE Chip Machine-Soldered Bulbs; White 5500K; 1157/BAY15D

Sequential LED Tail lights

These standout from all the others! The install was easy and they fit great. I’ve just had them on for a short time, so hopefully they hold up. They are bright and look really good.

LED Chip 1157 Bulbs

No worries replacement. Must get all around matching or signal flashes twice as fast.

Nice lights

Lights are very bright and give a nice unique look

Easy upgrade!

Quick and easy upgrade from stock to these LEDs. They look great, and were super easy to install!

Very Awsome

Awsome sequential tail lights. The sequence works tor turns and 4-ways. Bright and looks great.

Nice lights

Excellent lights, love sequential function. Easy to install.

Amazing tail lights

These tail lights are sleek and super easy to install. They have added dimension to the back of the jeep. Their super cool light patter makes for an aesthetically pleasing look.

Looked great but stopped working

Driver side stopped working after 5 years. Don’t think I want to spend $340 every 5 years to replace since they cannot be repaired

Great upgrade!

These look great and are a relatively easy install. The lights are really bright and the sequential movement add a great touch to the lights. Install was a bit tricky with getting into the area and getting everything back together. After getting the first one on, the second went in quickly.

Better LED Lighting

Esay when you have the correct installation video, the instructions provided are not installation specific. My challenge was with the fender liner which you need to remove, and I have the Xtreme Recon Fender Flare Extensions which are riveted with nylon pop rivets that cannot be reused. I chose not to remove the fender liner completely. I loosened the front half secured by the first 4 nylon rivets, this allowed sufficient space to access the underside of the fender for lamp removal/installation. I ordered replacement nylon pop rivets to secure everything back the way it was. Relatively easy with the right tools and installation video, but it took me about 2 1/2 hours. They are a great improvement to factory, worth the money and elbow grease.