How to Install Smittybilt SRC Front Stinger Bumper on your 1987-2006 Wrangler

Installation:

STEP 1: Remove the front plastic frame/stabilizer bar cover. (Fig A)

NOTE: The stabilizer cover will not be re-used.

STEP 2: Remove front bumper hardware and tow hooks (if equipped). (Fig A)

STEP 3: Install the stinger bumper (93-5790) and tow hooks using the previously removed OE hardware and supplied 1/2” washers on the bottom mounting bolts. Torque the OE bolts to factory specifications. (Fig A)

NOTE: Minor grinding of the frame horns may be necessary on certain YJ model installations.

NOTE: If you are installing winch plate (SB2802) at this time, secure the front bumper using the supplied winch plate hardware.

STEP 4: Installation is now complete. Check to make sure all bolts are secure.