How to Install Smittybilt Round Trail Mirrors on your 97-18 Jeep Wrangler TJ, JK & JL

Step 1: (JK) Remove the two upper side windshield bracket bolts using a #40 torx bit. (Fig A) (TJ) Remove the lower two side windshield hinge bolts (Fig B)
Step 2: (JK) Install the mounting bracket (the welded nut goes on the bottom) reusing the OEM bolts you previously removed (Fig C)
(TJ) Install the mounting bracket (the welded nut goes on the bottom) using the supplied two button head bolts.

Step 3: Slide bushings into bracket with the half moon cut out facing outward. (Fig D)
Step 4: Slide arm into busing lining up the holes at the end of the arm with the holes in the busing and mounting bracket. Secure and tighten with the included knob bolt. (Fig E)

Note: The mirror arms have two sets of holes in order to fit on both sides of the vehicle.
Step 5: Install and secure the mirror head onto the arm with the included 8mm hardware. (Fig F)

Step 6: Adjust the mirror head into the desired position. The head can be adjusted by loosening the screws on the back of it. (Fig G) When desired position is reach tighten screws. Check mirror clearance with door operation.
Note: It is recommended to use only with TJ when doors are off. Leaving doors on hinders the visibility on the passenger side.
Step 7: Make sure mirrors are in the optimal location and all hardware is secured. Installation is now complete. (Fig H)

Note: For quick use anytime the mounting brackets can be left on when mirrors are not needed. (Fig I)

Limited Warranties

Smittybilt's products are covered under the following limited warranties only. Note that the duration of the limited warranty differs according to the material and finish of the product purchased. Subject to the duration and conditions of the limited warranty stated below, Smittybilt warrants to the original retail purchaser that its products are free from defects in material and workmanship. All other warranties and representations express or implied, are hereby disclaimed, including fitness for merchantability and buyer's intended use or purpose. All parts are sold "AS IS" except for the limited warranties granted herein. Buyer assumes all risks as to the selection, suitability and performance of all goods and products selected. This limited warranty does not cover damage or impairment in any part due to misuse, improper installation, accident or contact with on-road or off-road hazards, product modification, improper or inadequate cleaning and/or maintenance. Smittybilt is not responsible for items damaged during shipping. This warranty is not transferable from the original buyer. For the original Buyer to be eligible for the limited warranty coverage, the Buyer must provide proof of purchase. Smittybilt strongly recommends returning the warranty registration card. Customer's remedy hereunder shall be limited only to repair or replacement (at Smittybilt's option) of any defective part(s) returned to Smittybilt at customer's expense. The determination of whether or not a returned part is defective or subject to coverage under the limited warranties stated herein shall be made at Smittybilt's sole discretion.
To assure product quality, Smittybilt reserves the right to change product design, material, specification and finishes without prior notice to customers. This limited warranty gives you specific legal rights and you may also have other rights, which may vary from state to state. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply as to you. Also, some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. Smittybilt reserves the right to discontinue product lines and substitute products, or provide other remedies than those listed in this limited warranty for those discontinued products.

Warning

Rollover and other types of vehicle accidents may result in serious injury or death to you, your passengers and others sharing the road. Smittybilt accessories are decorative and are not intended to reduce or avoid injury or damage in the event of an accident. The weight and location of Smittybilt accessories may affect your vehicles' handling, stability and performance, creating an increased risk of accident or rollover. Before installing any accessory, check state laws and assure that the accessory will not obscure any lights or interfere with proper operation on your vehicle's safety equipment. Consult your owner's manual and the Smittybilt instructions, or additional safety information. Smittybilt products, nor the warnings contained herein, are not a substitute for your safe driving. Don't drink and drive, always use seat belts and don't drive faster than conditions permit.