How to Install Smittybilt Full Climate Jeep Cover on your Wrangler

Installation Instructions:  

1. Open the box and take out the Jeep cover in the provided carry bag.  

2. Open the top of the carry bag and take out the package containing the lock and cable.  

3. Take the Jeep cover out of the carry bag and open it up outside your Jeep, making sure to find the area that is extended for your tire and place that toward the rear of the Jeep.  

4. Begin by placing the cover on the rear of the Jeep over the spare tire.  

5. Pull the rest of the cover over the jeep. Make sure to align the side view mirror with the extension in the cover for the side view mirror.  

6. Now go around to the other side of the Jeep and make sure to put your antenna through the provided cut out of the antenna. NOTE: I have a stubby antenna so it will only stick out slightly.  

7. Pull the cover over the hood and wrap it around the grille.  

8. You are done with the install of the cover.  

9. To lock your Jeep cover to the Jeep, take out the lock and cable from the bag and find the loops on the sides of the Jeep cover.  

10. Pull the cable through the plastic hole.  

11. You will need to put the same side of the cable through the other side of the cover, so bring the cable under the Jeep so it can reach the other plastic hole.  

12. Take the lock and lock it to the cable, as shown.