Rugged Ridge Front Sway Bar End Links for 3.50 to 4-Inch Lift (97-06 Jeep Wrangler TJ)Find parts that fit my vehicle

Sway bar ends

Fit well just came short two nuts and bolts had to go out and buy them

Not thrilled, but workable

First of all, instructions were not provided. Not a big deal, but would have been useful to at least have a parts list. Would have been nice to know I would have to press the bushings in myself, and good luck finding the right size adapters for a press (ended up jury-rigging). Also, the brackets that attach to the sway bar were angled in too far, so I had to bend them slightly to fit. The bolts that hold the upper ends to the bracket are too long, so I ended up installing them backwards so they wouldn't rub. The pins are so tight that it is nearly impossible to pull them without using tools. Overall, they do the job at a great price, but probably won't be buying from this manufacturer again.

Good parts

Good parts and easy to install was also happy that they came with the bolts as well

Easy instal

Very durable product and easy to install. A must have for your off road experience

Disappointed

These are offset and seem to bind and the pins are very hard to get in and out

NO MORE WRENCHES

Very nice product, simple installation, simple to remove the pins to go off road, everything is out of the way.

Decent

Decent product good easy to pull the pins and put back together, however when driving on the road and you take a sharp turn they scream and make a horrible binding noise.

Nice Front Disconnects

I'm very pleased with these Rugged Ridge front disconnects. Installation was a breeze and everything was good quality. Be aware that the pins can be hard to remove and reinstall but I assume a tight fit is necessary to prevent any loose rattling. Also, this kit does not come with any provision to hold the sway bar up and out of the way once you disconnect. A small bungee strap on each side will work OK for this purpose. All in all, a nice set of disconnects at a fair price.

Seriously beefy

These for some reason are much much more robust that I had imagined. Work great and should hold up well!

Check the bolt directions!

Easy install and no serious issues, though I do wish they would change the directions so that it clearly indicates the direction that upper bolts should go (pointed in, or pointed out). Mine are pointed in and the end of the bolt bumped part of the frame and needs to be cut off. Other than that minor thing, these are great. Oh, and don't waste your time trying to reconnect them in the field. You must be on a perfectly flat surface to get the links to line up and, even then, it takes some effort.