FREE 1 to 3-Day Delivery on Orders $119+ Details
How to Install Rugged Ridge Stainless Steel Hood Catch Set on your 2007-2013 Wrangler
Shop Parts in this Guide
Contents:
Upper Catch (2)
Upper Catch Gasket (2)
Upper Catch Screw Plate (2)
Upper Catch Lock Nuts (4)
Lower Catch Assembly (2)
Lower Catch Gasket (2)
Lower Catch Lock nut (2)
*Note - Only one side pictured.
1. Pre-assemble the components as shown in Figure 1.
2. Remove OE Hood Catches as shown in Figures 2a and 2b. Remove Rubber Bumper from OE Hood Catch (Figure 2c).
3. Install OE Rubber Bumper onto Stainless Hood Catch. Install Hood Catch onto vehicle where OE pieces were removed, making sure to install included gaskets under the pieces to protect paint.
4. Tighten all hardware. Close hood and latch Stainless Hood Catches.
Congratulations on the purchase and installation of a quality Rugged Ridge product!
