FREE 1 to 3-Day Delivery on Orders $119+ Details
How to Install Rugged Ridge Rectangular Stubby Trail Mirror - Textured Black (97-18 Wrangler TJ & JK) on your Jeep Wrangler
Shop Parts in this Guide
1. Carefully open the package using a box cutter or knife (Figure A) and ensure the hardware is included and undamaged.
Figure A
2. Using a Torx 40 bit, unscrew the top two bolts on the A-Pillar (Figure B).
Figure B
3. Remove both bolts (Figure C).
Figure C
4. Using the included hardware, bolt the mount to the A-Pillar (Figure D).
Figure D
5. Insert the mirror crossbar into the mount hole (Figure E).
Figure E
6. Thread the screw through the mount and mirror crossbar (Figure F).
Figure F
7. Connect the mirror to the mirror crossbar by threading the bolt and washer onto the rear of the mirror (Figure G).
Figure G
8. Using a 13mm wrench, tighten the bolt down (Figure H).
Figure H
9. Repeat Steps 2-8 on the other side.
Before
After
Installation Instructions Written by ExtremeTerrain Customer J. Sandlin 06/10/2018
