FREE 1 to 3-Day Delivery on Orders $119+ Details

Talk to a Wrangler Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
Black Friday is Here! Shop Early Deals >
Get $80 Off Redeem Now >

How to Install Rugged Ridge All Terrain Modular Front Bumper (07-18 Jeep Wrangler JK) on your Jeep Wrangler

Installation Time

60 minutes

View PDF Guide
Extreme Terrain
Shop Parts in this Guide


Bumper Shell, M12x60 Bolt (8), M12 Washer (8), M12 Nut Plate (4), Sheet Metal Screws (8), M8 Flat Head Bolt (4), M8 Washer (4), M8 Nut (4), Cover Plate

Installation Instructions:


1. Remove Factory bumper. There are 8 nuts which hold the bumper onto the chassis. Also be sure to disconnect the wiring plug from the fog lights and free the wiring conduit from the bumper. See below for bolt locations.


2. Unscrew the fog lights from the factory bumper and reinstall them on the new bumper using the provided sheet metal screws. See below.


3. Attach the bumper to the frame rails using the nut plates and M12 hardware. Tighten evenly. See below.


4. Installation Complete!


Installation Instructions Written by ExtremeTerrain Customer Lazaro Gomez 12/1/2015

Community Support

Word On The Trail

The videos outlining the capabilities, specs, and installation were instrumental to my decision on purchasing this winch. The website is well laid out which makes navigation a breeze. Friendly Customer Chat Support is helpful and appreciated as it provides a human connection for an otherwise cold internet transaction.

Honeylieg
Previous Slide Next Slide