FREE 1 to 3-Day Delivery on Orders $119+ Details

Talk to a Wrangler Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
Black Friday is Here! Shop Early Deals >
Get $80 Off Redeem Now >

How to Install a Rugged Ridge Hoop Over Rider Black Textured for Xtreme Heavy Duty Bumper on your 87-18 Jeep Wrangler YJ, TJ, JK & JL

Installation Time

5 minutes

Tools Required
  • 13mm wrench
View PDF Guide
Extreme Terrain
Shop Parts in this Guide

Before


Part One: Install Hoop to Bumper 

Step One: Align the Hoop onto the Bumper 

Place the hoop onto the bumper, aligning the holes in the hoop base plate with the holes in the XHD bumper. The hoop can be installed either leaning forward (away from the grill), or backwards (towards the grill). 


Step Two: Secure Hoop to Bumper 

Using the supplied washers/bolts, place a washer on each bolt, and slide the bolts through the hoop base plate and into the bumper. Tighten with a 13mm socket. Slowly tighten being sure to alternate between the bolts. 


After


Community Support

Word On The Trail

I appreciate the time your staff took making videos to demonstrate how a product will look on my vehicle as well as how easy/challenging it will be to Install. It is so refreshing to purchase a product from a person/company with actual first hand knowledge of that product. Informed decision equals buyer appreciation/confidence. Thank you.

campmartin
Previous Slide Next Slide