Guaranteed 12/24 Delivery Still Available see item page for details! available on most items - Details

Talk to a Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
Win $4,000! Enter Daily

How to Install Rugged Ridge All Terrain Double X Striker (07-18 Jeep Wrangler JK; 2018 Jeep Wrangler JL) on your Jeep Wrangler

Installation Time

60 minutes

Tools Required
  • Ratchet
  • Ratchet Extension
  • 3⁄4 Socket
  • 13mm Socket
  • Phillips Screwdriver
View PDF Guide
Extreme Terrain
Shop Parts in this Guide


Double X Striker, M8 Bolt (8), M8 Washer (16) , M8 Lock Nuts (8)

Installation Instructions:


1. Remove bumper if previously installed. Make sure to disconnect the fog light wiring, and slide the bumper off the frame. See below for bolt locations.


2. Position the double x striker on the bumper aligning all of the predrilled holes. Attach the top portion using the M8 hardware provided.


3. Fasten the d-ring portion of the double x striker and bumper to frame rails using the M12 hardware and nut plates. Tighten them evenly.


4. Installation Complete.


Installation Instructions Written by ExtremeTerrain Customer Lazaro Gomez 12/1/2015

Community Support

Word On The Trail

If you ask a question, you get a real response from a real person looking into your application for whatever it is you are buying. They have a great review section and will even help with install questions.

sychoblondii
Previous Slide Next Slide