How to Install a Rugged Ridge Dash Multi-Mount Storage System in your 2011-2015 Jeep Wrangler JK

Components:

1. Accessory Mount Base (1)
2. Rubber Tray (1)
3. Universal Ball Mount (1)
4. Cap Piece (1)

1. Remove factory rubber tray from dashboard stor­age area above center console. 

2. Remove factory screw using a socket driver and a 7 mm socket. Do not discard factory screw, it will be reused in product installation. 

3. Install Accessory Mount Base. Hooks on arms of Accessory Mount Base will snap into upper dash­board vents closest to windsheild. 

4. Reinstall factory screw removed in Step 2. 

5. Place custom Rubber Tray into dashboard stor­age area. 

To remove Accessory Dash Mount Organizer:

1. Remove custom rubber tray from dashboard stor­age area. 

2. Remove factory screw using a socket driver and 7 mm socket. 

3. Rotate Mount Base towards the windshield until hooked arms release from dashboard vents. 

4. Replace factory screw and factory rubber tray in dash storage area.