RPM Steering Double Triangulated 4-Link Rear Long Arm Bracket Kit (18-25 Jeep Wrangler JL 4-Door)Find parts that fit my vehicle

JLU Double Triangulated 4-Link Rear Long Arm Bracket Kit We set out 2 years ago to design a double triangulation for the JLU that solved many challenges and restrictions with the JL platform. We gave up a small amount of belly height (not a flat belly) to achieve better anti-squat and roll center numbers. The results were incredible and if our recommended rear axle separation is used a 94 anti-squat can be achieved on a JLU. There is no need to remove the body for installation. Kit includes: Rear weld in laser cut cross member with lower link mounts. Rear weld in upper link frame side mounts. Truss top 4-link mounts (truss not included). Axle side lower control arm mounts. (1) Skid Plate 1/4" laser cut and CNC broke smooth bottom. Includes all grade 8/10.9 hardware. PLEASE NOTE: This kit requires: An exhaust modification. Cutting off factory mounts. Welding in new mounts. The side JLU factory fuel tank be removed. Rear axle truss required and sold separately. Our skid plate can be modified to work with other front crossmembers (call for details). Evaporative canister will need to be relocated. This kit DOES NOT INCLUDE control arms or joints. Build your own or order from us when you are ready!

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov