RPM Steering Double Triangulated 4-Link Rear Long Arm Bracket Kit (07-18 Jeep Wrangler JK 4-Door)Find parts that fit my vehicle

JKU Double Triangulated 4-Link Rear Long Arm Bracket Kit We set out 2 years ago to design a double triangulation for the JKU that solved many challenges and restrictions with the JK platform. We gave up a small amount of belly height (not a flat belly) to achieve better anti-squat and roll center numbers. The results were incredible and if our recommended rear axle separation is used a 94 anti-squat can be achieved on a JKU. There is no need to remove the body for installation and our skid plate will bolt to your front cross member by drilling four additional holes. Kit includes: Rear weld in laser cut cross member with lower link mounts. Rear weld in upper link frame side mounts. Truss top 4-link mounts (truss not included). Axle side lower control arm mounts. (1) Skid Plate 1/4" laser cut and CNC broke smooth bottom. Includes all grade 8/10.9 hardware. PLEASE NOTE: This kit requires: An exhaust modification, moving the Y link behind the cross member (2012+ both Magnaflow and AEM make bolt-in Y pipe kits). Cutting off factory mounts. Welding in new mounts. The side JKU factory fuel tank be removed. Outboard coil overs. Rear axle to have a truss. Our skid plate can be modified to work with other front crossmembers (call for details). Evaporative canister will need to be relocated. Exhaust will need to be customized. This kit DOES NOT INCLUDE control arms or joints. Build your own or order from us when you are ready!

Fitment:

• 2007 Jeep Wrangler
• 2008 Jeep Wrangler
• 2009 Jeep Wrangler
• 2010 Jeep Wrangler
• 2011 Jeep Wrangler
• 2012 Jeep Wrangler
• 2013 Jeep Wrangler
• 2014 Jeep Wrangler
• 2015 Jeep Wrangler
• 2016 Jeep Wrangler
• 2017 Jeep Wrangler
• 2018 Jeep Wrangler

Details

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov