RPM Steering Double Triangulated 4-Link Rear Long Arm Upgrade with 2.25-Inch Links (07-18 Jeep Wrangler JK 4-Door)Find parts that fit my vehicle

JKU Double Triangulated 4-Link Rear Long Arm Upgrade We set out 2 years ago to design a double triangulation for the JKU that solved many challenges and restrictions with the JK platform. We gave up a small amount of belly height (not a flat belly) to achieve better anti-squat and roll center numbers. The results were incredible and if our recommended rear axle separation is used a 94 anti-squat can be achieved on a JKU. There is no need to remove the body for installation. Kit includes: Rear weld in laser cut crossmember with lower link mounts. Rear weld in upper link frame side mounts. Truss top 4-link mounts (truss not included). Axle side lower control arm mounts. (2) 1.75" solid 7075 T6 aluminum links with narrow Rock Jock Johnny Joints. (2) 2" solid 7075 T6 aluminum links with narrow Rock Jock Johnny Joints. (1) Skid Plate in 1/4" laser cut and CNC broke smooth bottom. Includes all grade 8/10.9 hardware. PLEASE NOTE: This kit requires: An exhaust modification, moving the Y link behind the cross member (2012+ both Magnaflow and AEM make bolt-in Y pipe kits). Drilling one hole and welding a third link mount on the axle or truss. The side JKU factory fuel tank be removed. Outboard coil overs. Rear axle to have a truss. Our skid plate can be modified to work with other front crossmembers (call for details). Evaporative canister will need to be relocated. Exhaust will need to be customized.

Fitment:

• 2007 Jeep Wrangler
• 2008 Jeep Wrangler
• 2009 Jeep Wrangler
• 2010 Jeep Wrangler
• 2011 Jeep Wrangler
• 2012 Jeep Wrangler
• 2013 Jeep Wrangler
• 2014 Jeep Wrangler
• 2015 Jeep Wrangler
• 2016 Jeep Wrangler
• 2017 Jeep Wrangler
• 2018 Jeep Wrangler

Details

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov