RPM Steering 3-Link Front and Double Triangulated 4-Link Rear Long Arm Bracket Kit (18-25 Jeep Wrangler JL 4-Door w/ Stock Axles)Find parts that fit my vehicle

JLU 3-Link Front/4-Link Rear Double Triangulated Long Arm Bracket Kit We set out 2 years ago to design a double triangulation for the JLU that solved many challenges and restrictions with the JL platform. We gave up a small amount of belly height (not a flat belly) to achieve better anti-squat and roll center numbers. The results were incredible and if our recommended rear axle separation is used a 94 anti-squat can be achieved on a JLU. There is no need to remove the body for installation. Kit includes: Bolt-in front cross member with lower link mounts. Bolt-in drivers side frame third link mount. Front 3rd Link Clasp with 1-14RH Threading. Johnny Joint Press in Uniball for factory and aftermarket axle applications. Passenger side 3rd link mounting available depending on application. Rear weld in laser cut crossmember with lower link mounts. Rear weld in upper link frame side mounts. Truss top 4-link mounts (truss not included). Axle side lower control arm mounts. (1) Skid Plate 1/4" laser cut and CNC broke smooth bottom. Includes all grade 8/10.9 hardware. NOTE!!! 3.6L Gas Engine users will need to install an Exhaust Loop Delete kit such as the AFE Part number 48-48024 or Magnaflow Part number 19432 or similar. PLEASE NOTE: This kit requires: An exhaust modification. A Loop Delete is required. Drilling holes and welding. The side JLU factory fuel tank be relocated. Rear axle truss required and sold separately. Our skid plate can be modified to work with other front crossmembers (call for details). Evaporative canister will need to be relocated. Exhaust will need to be customized. This kit DOES NOT INCLUDE control arms or joints. Build your own or order from us when you are ready! Diesel Owners call first.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov