FREE 1 to 3-Day Delivery on Orders $119+ Details

Talk to a Wrangler Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
Black Friday is Here! Shop Early Deals >
Get $80 Off Redeem Now >

How to Install Rough Country 1 In. Seat Risers on your 1997-2006 Wrangler

Tools Required
  • T-55 bit
  • 13mm socket
  • 5/8" socket
  • Rachet
View PDF Guide
Extreme Terrain
Shop Parts in this Guide

INSTALLATION INSTRUCTIONS
1. Remove the 4 bolts from front driver seat that secures the seat frame to the floor pan. The rear bolts will require a T-55 bit. The other three bolts will be removed using a 13mm socket. The front bolt is pictured in Photo 1.


2. Place the supplied 1” puck in between the seat frame and the floor pan. Secure with the supplied 7/16” and 8mm bolts using a 5/8” socket and 13mm socket. See Photo 2.


3. Re-check each bolt/nut for tightness.


4. Repeat steps on passenger seat.


Community Support

Word On The Trail

Found what I was looking for, went to check out and in less than a minute I was on my way.

danno63-51733
Previous Slide Next Slide