FREE 1 to 3-Day Delivery on Orders $119+ Details
How to Install Rigid Industries D-Series LED Cube Lights - Spot Beam - Pair on your Jeep Wrangler
Installation Time
60 hours
Tools Required
- Crescent Wrench/Allen Wrench
- Box Cutter/Knife
1. Attach the negative (-) wire of the supplied wiring harness to the negative (-) battery terminal (Figure A).
2. Attach the positive ( ) wire of the supplied wiring harness to the positive ( ) battery terminal.
3. Run the switch wires to the switch internally and run the connectors to the LED mounting locations (Figure C).
4. Connect the LED to a light mount (sold separately) using an Allen wrench or crescent wrench (Figure D).
5. Position the light path and then tighten down the hardware to hold the LED into position (Figure E).
6. Plug the LED light into the wiring harness connector (Figure F).
7. Repeat Steps 5-7 for the other LED.
Installation Instructions Written by ExtremeTerrain Customer J. Sandlin 06/13/2018.