How to Install Rightline Gear Roll Bar Storage Bag - Black (87-18 Wrangler YJ, TJ, JK & JL) on your Jeep Wrangler

The Rightline Gear Roll Bar Storage Bag can be installed with the top up or down. Depending on your setup your mounting location may be dictated by hardware for the top. In the installation on this 2005 Wrangler Unlimited the bag is located to the inboard side of the roll bar to allow the top to be raised and lowered. 

1. Fill bag to expand it. It will be easier to install if filled with light soft items such as clothing.

2. Locate your mounting point on a vertical section of the roll bar. Ensure that the location will not interfere with operation of the top if in use.

3. With the zipper located at the top of the bag, wrap the bottom strap around the roll bar making sure it is not twisted. Buckle and tighten the strap enough to hold it in place. 

4. Buckle top strap.

5. Tighten both straps to fully secure the bag and move sliders to end of straps to secure extra length. 

Installation Instructions Written by ExtremeTerrain Customer Jason Horn 12/17/2017.