Guaranteed 12/24 Delivery Still Available see item page for details! available on most items - Details
Talk to a Wrangler Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
How to Install RedRock 4x4 Max-HD Stubby Front Bumper w/ LED Fog Lights & Winch Mount (07-18 Wrangler JK) on your Jeep Wrangler
Shop Parts in this Guide
Installation Steps:
1. Reference parts lists and installation drawings, check the accessories are complete.
2. Remove the factory bumper & the frame bracket, to fix the bumper to the frame with the screws. (Fig.1 & Fig.2 & Fig.3AB)
3. All bolts are screwed on and adjust the best position to slowly tighten all bolts.
4. Check for leakage on the bolts, make sure tighten all the bolts.
Installation Diagram:
Place the bumper onto vehicle and install 10mm washers and locknuts. (Fig.4-AB)
