FREE 1 to 3-Day Delivery on Orders $119+ Details

Talk to a Wrangler Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
Black Friday is Here! Shop Early Deals >
Get $80 Off Redeem Now >

How to Install Raxiom 50 in. LED Light Bar Windshield Mount (97-06 Wrangler TJ) on your Jeep Wrangler

Installation Time

30 minutes

Tools Required
  • T-40 WRENCH
  • 3/16” Allen Wrench
View PDF Guide
Extreme Terrain
Shop Parts in this Guide

KIT CONTENTS
Rubber (2)
Dr and Pass Bracket (1 each)
5/16” x 1” Stainless Button Head Bolts

INSTALLATION INSTRUCTIONS

1. Remove the factory hardware, (4) per side, as shown (Photo 1) using a T-40 wrench.

2. Remove adhesive backing from rubber gasket. Align holes in gasket with inside of bracket. Firmly press gasket into inside of light bracket. Rubber gasket should be between light bracket and vehicle body.  

3. Align the bracket and rubber to pillar and apply using supplied 5/16” stainless button head allen screws using a 3/16” allen wrench. Leave loose. See Photo 2. 


4. Repeat steps for other side of vehicle.  

5. Using a lock washer and 8mm provided with purchase of light, install light as shown in Photo 3 using 6mm wrench provided. See Photo 3. 


6. After light is installed, tighten all hardware.

Community Support

Word On The Trail

Have ordered various items from Extremeterrain and I have to say that I have yet to be disappointed. Website is easy to navigate and easy to follow. The check out is fast and efficient, no hidden costs. If you need to talk to an expert, their guys are some of the best

juvefett
Previous Slide Next Slide