FREE 1 to 3-Day Delivery on Orders $119+ Details
How to Install Putco ABS Fender Flares - Chrome (07-17 Wrangler JK) on your Jeep Wrangler
Installation Time
2 hours
Tools Required
- Rivet Gun
- 10mm socket and 3/8 drive ratchet
- Utility knife
- Flat screw driver
- Body clip removal tools recommended
- Needle Nose Pliers
- Car Jack
- Jack Stand
- Tire Iron
Shop Parts in this Guide
Hardware Kit
Specialty body clips (14 pcs for front fenders) (20 pcs for rear fenders)
Christmas tree style plastic retaining clips (8 pcs for fr ont fenders) (10 pcs for rear fenders)
Plastic rivets (12 pieces for front fender) (12 pieces f or rear fender)
1) Location of specialty clips that hold the fender to the vehicle
2) Location of the reusable plastic push pin
3) The arrows point to the location of the four 10mm bolts
1) Location of arrows shows where pressure should be applied to flex the part into place
2) Location of arrows shows where the six rivets need to be removed from the fender
3) The arrows show where the ten specialty plastic clips attach to the vehicle
4) These two locations must be aligned first for fender to attach properly
