FREE 1 to 3-Day Delivery on Orders $119+ Details
How to Install Off Camber Fabrications by MBRP Roof Rack Extension, Black Coated on your Wrangler
PLEASE READ BEFORE STARTING INSTALLATION
While MBRP Inc. has mode every effort to ensure that all components of this kit ore of superior quoilly cind properly pocka9e(1,. it is the installer's responsibility to ensure the following before starling:
• that ALL cornponent$ shown above are present.
• that ALL mating components Iii together.
▪ that there are no damaged components.
• that the kit you have purchased is appropriate for your year and model of vehicle_
• that the kfil will not interfere with any modifications previously installed or planned.
• that you have read and understand these instructiom.
If you have any questions or are uncertain about any aspect of the installation of this kit on your vehicle please contact your dealer before commencing installation.
1. Remove the top bolt from the driver side light bracket on the windshield upright. Install the Driver Side Bar behind the windshield upright and loosely secure with the previously removed bolt. Refer to Figure 1.
2. Install a 5/16 Bolt and Washer through the rear bracket of the Driver Side Bar and thread it into the Roof Rack. Refer to Figure 2.
3. Install a 5/16” Bolt and Washer through the hole in the side of the windshield upright and secure it with a Washer, and a 5/16” Nut. Tighten all hardware. Refer to Figure 3.
4. Repeat steps 1 through 3 to install the Passenger Side Bar.
5. Install the Crossbar and secure it with the supplied Knobs and Washers. Refer to Figure 4.
Congratulations! You’re finished! We are sure that you will enjoy this Off Camber Fabrications product by AfBRP Inc.
