Talk to a Gladiator Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
Black Friday is Here! Shop Early Deals >
Get $80 Off Redeem Now >

Find Differential Covers for your Gladiator

Motobilt DIY Dana M200 Rear Differential Cover; Bare Steel (20-25 Jeep Gladiator JT Launch Edition, Rubicon)Find parts that fit my vehicle

Item JG18821
Motobilt DIY Dana M200 Rear Differential Cover; Bare Steel (20-25 Jeep Gladiator JT Launch Edition, Rubicon)
Verify parts fit and get product recommendations.
Gladiator Sales Techs: Connect Now M-F 8:30A-11P, Sat-Sun 8:30A-9P
$118.75
Want $10? Write one of the first 5 reviews 4.8 Motobilt Drivetrain product ratings
On Sale

-5% $118.75 Was $125.00

to: 43215
Please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.

Will this fit your Vehicle?

Select a different vehicle Help?
Update or Change Vehicle
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    or use

      Product Information

      Description, Q&A

      Description

      Description. If you can weld and want to build your own diff cover, purchase the Rubicon Rear DIY DIFF Cover M220 for Jeep JL & JT. Motobilt DIY Diff Covers are the same as our fully-welded diff covers, but sold as a kit including the pre-formed pieces and hardware you will need to complete the DIY project yourself. We have included assembly instructions as well.

      Why change out your diff cover? We do get asked this question on occasion. The factory diff covers are too thin for abuse on the trail. One of the common factory diff cover failures occurs when the edge gets peeled up from a rock sliding across the diff. Peeling can cause the differential fluid to leak out unknowingly and the result could be damaging the gears when you hit the road to drive home.

      Another failure of factory diff covers are from bending the cover into the ring gear which rubs a hole through. The result here is the same with differential fluid leaking out. One other failure is actually puncturing the factory diff cover with a sharp rock. Again resulting in differential fluid leaking out. Hopefully this explains the need for a heavy duty diff cover. The Motobilt Heavy Duty Fabricated Diff Covers address the failures I have mentioned to ensure your ring and pinion gear sets are well protected.

      All Motobilt Diff Covers include a LIFETIME WARRANTY from trail damage and manufacture defect. We cannot warranty DIY Diff Covers being welded incorrectly.

      As with all Motobilt DIY builder parts, an experienced welder is recommended.

      Installation Note: We strongly recommend tacking the pieces together and test fitting it onto the axle before finish welding. We also recommend using pipe thread tape for the fill plug.

      Warranty. LIFETIME WARRANTY

      Fitment:

      Details

      Motobilt MB4073-DIY

      CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

      4.8

      Reviews of Motobilt Drivetrain Products (5)

      Brand Image

      Reviews of Motobilt Drivetrain products have an average rating of 4.8 out of 5

      Questions & Answers

      No questions about this product yet. Ask the First Question

      Will It Fit My Gladiator

      • 3.0L V6 EcoDiesel - 20, 21, 22, 23, 24
      • 3.6L V6 - 20, 21, 22, 23, 24, 25