How to Install a M.O.R.E. Evap Skid Plate on your 2007-2011 Jeep Wrangler JK

1– Evap. Skid Plate
1– 7/16”-14 x 2-3/4”
2- 7/16 Flat Washer
1– 7/16-14 Lock Nut

Please read and understand all instructions before beginning the installation of the Evap. Skid Plate. Please read the terms and policies on the back of these instructions.

The JKESP07 Skid Plate is designed to fit the following Jeep® vehicles: 2007-2009 JK Wranglers.

STEP 1: Set parking brake before crawling under vehicle.

STEP 2: Remove hose connector on backside of the Evap. Canister ( only remove the hose closet to the Drivers side and be careful not to break the plastic nipple) See Figure 1

STEP 3: Remove all three bolts that attach the canister to the chassis being careful to support the canister once all the bolts are removed. See Figure 2

STEP 4: Install the New Skid Plate over the evap. Canister and start all the original bolts that you removed in Step 3 but do not tighten. See Figure 3

STEP 5: Install the 7/16-14 x 2-3/4” bolt, washers and nut from the top using flat washers under the head and nut. See Figure 4 Tighten all the bolts.

STEP 6: Reinstall the hose through the hole in the skid plate and back onto the evap. Canister ( Apply some lube on hose for easier installation) . See Figure 5

GO JEEPIN!

FIT and TOLERANCES: M.O.R.E.™ parts are the results of countless hours of research, testing, fitting and refining. Jeep® frames have a wide tolerance on bolt hole centers from frame to frame. This is why M.O.R.E.™ has installed “slots” in which to mount them. In addition to the factory tolerances, most people install other then factory equipment such as suspension lift kits, skid plates, different transfer cases etc. M.O.R.E.™ has done the best job we can to insure that our parts fit with all of the possibilities. However, you may find it necessary to grind, elongate, bend, or force these parts to fit on your rig. Please use common sense when installing these parts and let us know how we can improve them.

DAMAGE CLAIMS: All orders are carefully packed, however, mishandling by the carrier can result in damage. The carrier has the responsibility for the shipment from the time it leaves our warehouse until it is delivered to you. All claims for lost or damaged goods should be reported to the carrier, not to M.O.R.E.™ LLC.

RETURNS: No returns will be accepted without prior permission from M.O.R.E.™ LLC. After you receive a Return Goods Authorization (RGA) number, merchandise must be returned prepaid and insured. A claim must be made with in 30 days from receipt of merchandise. The original invoice or a copy with the RGA number written on must accompany all returns. A 20% restocking fee will be charged on all parts returned for credit or refund unless merchandise is proven to be defective or was shipped wrong by M.O.R.E.™ LLC. No merchandise will be issued credit or refund if it has been installed, modified, used in any way or is in unsalable condition.

WARRANTY: All merchandise is warranted to be free from defects in materials and workmanship prior to installation. Any alteration or improper use will void this warranty. Because all parts we sell are intended for use in heavy-duty applications it is not possible to warrantee or guarantee the performance of any items. M.O.R.E.™ LLC. products and the products manufactured by others, which we sell may be subject to an infinite variety of conditions due to the manner in which they are used, serviced and/or installed. Purchasers and users of such products rely upon their own judgment as to the suitable use selection, service and installation of such products.

PRODUCT DISCLAIMER: Modification of your vehicle to enhance performance with parts sold by M.O.R.E.™ LLC. may create a dangerous condition which could cause serious bodily injury, and the buyer hereby expressly assumes all risks associated with any such modifications. All parts sold by M.O.R.E.™ LLC. are for racing or off road use only. Mountain Off Road Enterprises LLC. will not accept responsibility for personal injury or property damage arising from the failure of any parts manufactured or sold by M.O.R.E.™ LLC. 

Specifications are subject to change without notice.

Jeep®, AMC®, CJ®, YJ®, TJ®, LJ®, JK®, Wrangler®, are registered trademarks of DaimlerChrysler. M.O.R.E.™ is not affiliated with DaimlerChrysler.

​M.0.R.E™, BombProof™, S.R.S.™, SlipLoc™, DoubleJointed™, RockProof™, are trademarks used by Mountain Off Road Enterprises, LLC. These instructions and the M.O.R.E.™ logo are copyright©, 1999-2009.