FREE 1 to 3-Day Delivery on Orders $119+ Details
How to Install Kurgo Impact Dog Car Harness - Black/Charcoal (87-18 Wrangler YJ, TJ, JK & JL) on your Jeep Wrangler
Shop Parts in this Guide
1. Carefully open the package using a box cutter or knife (Figure A) and ensure the harness is included and undamaged.
2. Locate the nesting buckle on the top rear of the harness (Figure B).
3. Release the nesting buckle (Figure C).
4. Unhook the middle stretchable loop from the plastic hook (Figure D). Loosen straps so that the harness can easily fit over the dog's head.
5. Slide the harness over the dog's head so that it rests on the dog's back (Figure E).
6. Locate the nesting buckles on the backside of the harness again (Figure F).
7. Pull the nesting buckle back through on each side and tighten the straps around the dog, allowing enough room to hook two fingers between the strap and the dog.
8. Locate the two overhanging top straps (Figure G).
9. Run the seatbelt through both loops and buckle it into the seatbelt clasp (Figure H).
Installation Instructions Written by ExtremeTerrain Customer J. Sandlin 12/20/2017.