FREE 1 to 3-Day Delivery on Orders $119+ Details
How to Install KC HiLiTES 6 in. Black Daylighter Round Halogen Lights - 100W Spot Beam - Pair on your Jeep Wrangler
Shop Parts in this Guide
1. Align the Surface Mount LED Light to the GoPro mount (not included) (Figure A).
Figure A
2. Press firmly until the two mount extensions from the LED Light are fully flush with the three GoPro mount extensions (Figure B).
Figure B
3. Thread the GoPro mount screw in and ensure it runs through all five holes (Figure C).
Figure C
4. Tighten the GoPro screw down to secure the LED Light to the GoPro mount (Figure D).
Figure D
5. Connect a light harness end (not supplied) to the LED Light's black and red (negative and positive) wires (Figure E).
Figure E
6. Run the wiring harness (not supplied) to the battery, switch, and LED Light mounting location(Figure F).
Figure F
7. Connect the light harness end to the wiring harness (Figure G).
Figure G
Before
After
Installation Instructions Written by ExtremeTerrain Customer J. Sandlin 09/14/2018
