JKS Manufacturing J-Flex Front Lower Control Arm Service Pack (84-01 Jeep Cherokee XJ)Find parts that fit my vehicle

Good product easy install

The sway bar disconnects really clean up the look / performance of the sway bar in the Jeep. Install was pretty easy and straight forward. However they do supply you with additional hardware to accommodate other jeep models. Biggest thing is make sure you read the install instruction throughly. Over the original stock design these sway bar links have better articulation and allow the suspension to move in a more natural way

Bar Pin Eliminator-easy improvement

Easy/quick to install, allows me to replace those flag bolts in the unibody. If I ever get a different shock I will have more options as well. MUSA is a nice touch

Solved my shock problems

Product was easy to bolt up just unbolt the fuel filter bracket from the frame and drop the fuel lines to give you enough room to slide it over them and bolt the bracket in the factory shock holes. I put this on my 88 4 door Cherokee to allow me to run longer Fox 2.0s off my old TJ the issue I had was with only a 3” lift spring in the rear and welding on low profile shock mounts on the axle I only had “2 of shaft showing before the shock would bottom out after installing these and running the shocks inward I got 5” of shaft showing so I won’t blow my shocks out and it’ll also increase the flex by quite a bit I had a similar style bracket on my Suzuki samurai and loved how much it helped with my rear axle articulation I’m looking forward to taking this on the trails now and see how much I can get out of it

Working great

Easy install, able to start and finish in an afternoon

Brian W

Solid ,good quality product. Fairly priced ,perfect for my suspension lift.

GREAT PRODUCT

EASY INSTALL, GREAT LOOK, EASY DISCONNECT, INSTALLED ON MY 05 LJ WITH A FULL M.C. 4 INCH LIFT

Quality Parts!

This is a quality kit with everything needed for the lift. The only issue was on the rear axle track bar relocation bracket. It had to be modified to clear the rear axle vent tube. Other than that, I am very pleased with the quality and performance of this kit.

Perfect for restoring my tracking bar

Everything fit as spec'd. With the right tools it was a breeze to replace.

Great Kit

Perfect kit for reviving my JKS trackbar. In an era of planned obsolescence its nice to have components that are able to be serviced.

JKS Rebuild Kit

Includes all you need to refresh your JKS Quicker Discos. Not an ez job, but doable by youjr basic shade tree mechanic. Really need a vice w/5" open jaws.