FREE 1 to 3-Day Delivery on Orders $119+ Details
Talk to a Wrangler Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Find Sensors & Sending Units for your Wrangler
2018-2024
2007-2018
1997-2006
1987-1995
1976-1986
Engine On Sensor Cable
Item J224025$0.00
Our Price
$31.99
Ship to: 43215
Please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
Choose options to add to cart.
Saved - View your saved items
We're sorry. We couldn't save this product at this time.
or use
Product Information
Description, Q&A
Description
Engine On Sensor Cable
This is an optional feature for our Gen 3 dual battery systems. The fuse tap fits into a "Micro Fuse" slot in the fuse box.Highly recommended for the Jeep JL & Gladiator due to its smart alternator. Not needed for the earlier Jeep JK or most Toyota vehicles.This cable plugs into a built-in connector under the cover to sense when the engine is running
Changes the threshold for connecting/disconnecting the batteries
Ensures the Aux battery continues to charge even when a modern 'smart alternator' senses the batteries are full and turns down its output
Connects batteries together 30 seconds after engine starts, leaves them connected unless voltage drops below 11.6v with engine on, or under 13.1v for 5 minutes with engine off.To use, lift bus bar cover and grab the small green wire, plug in sensor cable into the green bullet connector, route cable to the factory fuse box, find and remove any ignition-hot circuit fuse, insert factory fuse into fuse tap, insert fuse tap into factory fuse box.The Jeep JK and most Toyota vehicles do not have a smart alternator that drops the voltage down below 12.7v while the engine is running, therefore it is not needed on those vehicles.
CA Residents: 
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Questions & Answers
No questions about this product yet.
Ask the First Question
