Infotainment Factory OEM ParkSense Rear Park Assist (20-24 Jeep Gladiator JT)Find parts that fit my vehicle

PRODUCT DESCRIPTIONThe ParkSense system detects objects located behind the vehicle within defined coverage zones. When an object is detected, the system provides an alert to the customer based on the selected customer configuration and the object’s location and distance relative to the vehicle. The system assists the driver during parking by sensing obstacles situated outside the driver’s field of view.The information regarding the presence and distance of an obstacle is transmitted to the driver in the form of an audible alert and graphic display on the instrument cluster. The audible alert is pulsed at a rate dependent on distance to the obstacle.This highly sought after safety upgrade is 100% fully plug & play and will operate like it would be from the factory which means the settings can be controlled from the factory radio display.*Please Note – A replacement rear bumper is not included* Our kit includes the security gateway module bypass and the OBD Genie C-XAA programmer which will enable the “XAA : ParkSense Rear Park Assist” option code within the Jeep’s body control module. Dealer programming is not required!Below is an informative video from Mopar regarding the Gladiator JL ParkSense feature:*Rear ParkSense Braking Assist not currently available as an upgradeable feature** A replacement rear bumper equipped with the 4 sensor holes is required for this upgrade. There are many to choose from online but two examples would be the Mopar Steel Bumper: 68341830AA, and Mopar Injection Molded Black Bumper: 6RG14RXFAA.Many aftermarket versions will come with the holes pre-drilled and include plastic caps to fill the holes in the event the Jeep isn’t equipped with XAA – Rear Park Assist.THINGS TO KNOW* The volume at which the park assist feature chimes can be controlled through the factory radio settings menu. Low / Medium / High.* ParkSense can be active only when the gear selector is in REVERSE or DRIVE. If ParkSense is enabled at one of these gear selector positions, the system will remain active until the vehicle speed is increased to approximately 7 mph (11 km/h) or above. A warning will appear in the instrument cluster display indicating the vehicle is above ParkSense operating speed. The system will become active again if the vehicle speed is decreased to less than approximately 6 mph (9 km/h).* A replacement rear bumper equipped with the 4 sensor holes is required for this upgrade. There are many to choose from online but two examples would be the Mopar Steel Bumper: 68341830AA, and Mopar Injection Molded Black Bumper: 6RG14RXFAA.Many aftermarket versions will come with the holes pre-drilled and include plastic caps to fill the holes in the event the Jeep isn’t equipped with XAA – Rear Park Assist.

Fitment:

• 2020 Jeep Gladiator
• 2021 Jeep Gladiator
• 2022 Jeep Gladiator
• 2023 Jeep Gladiator
• 2024 Jeep Gladiator

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov