ICON Vehicle Dynamics Hose Routing Kit for 1.75-Inch Rear Lower Links (21-25 Bronco, Excluding Raptor)Find parts that fit my vehicle

ICON 3-Inch Coil-Over Spacers

The install wasn’t too bad. Parts fit perfectly and man, the ride quality is awesome. You can’t beat the price for a little extra clearance. Removed the stock UCA and added the Elevate upper control arm.

Rod Maher

Great product. No sway or give from the suspension system at all. High quality appearance.

Icon stage 2 lift

I put this on a 2012 4 runner. I can say this lift took me and a helper about 4.5-5 hours to install. The ride from the lift is far superior than the factory suspension that came on the 4 runner and the best part no more nose diving while coming to a stop and feels more planted. The quality of the the components are just as you would expect from Icon top notch. The shipping was delayed not due to any part of extreme or Icon, just my luck I ordered right as the fires started in California, but I will say definitely worth the wait.

Icon rocks

I was tired of my rough ride with the bilsten shocks I had. The icons have a much improved ride smooth on the small stuff and doesn’t bottom on the big hits

Tooted up

Great customer service Love the look Rides actually better than stock I have ko3 265/70/18

ICON

Great product! Quick shipping, performs fantastic!

Notafrown

I started out with a 1” block under my old spring which I removed prior to the install. Ground to fender well averaged 38 1/2”. After Icon spring install was 39 1/4”, using no block. After test ride was what I was aiming for. Some lift and a smooth ride using the stage one option.

Dang ol!

I welded 2 springs together to double the spring length and ShoooooWeeeeee! Ridin High!

front sway bar links

these links arm made high quality! they look and feel beefy! they came packaged very well! install was straightforward and easy! these can def take a beating on the trail! highly recommended!

2010 Tacoma Dbl Cab 4x4, with snug top shell 5'.

Was a fairly simple install, you will need a cut off wheel, a 4" grinder, machinists maul 32oz, heavy punch, 2 good jackstands, a good jack and of course the sockets, breaker bar, torque wrench plus about 4hours from start to finish. The results were good lifted the back of the truck 1.375 inches from where it was before the install. ride remains very good still fairly plus with no bottoming out. Had to buy a 5" drop draw bar to replace the 3.5" to keep the trailer level. trailer is a 5ft x12ft single axle loaded with a Honda XR650L and XL1200R Sportster. Truck Rides Perfectly with or without the trailer. This spring kit is exactly the correct fix to bottoming out and rear sag with minimum lift. Now may add a 1" lift spacer or spring kit of 1" to the front end. Put a 600 mile trip on the truck towing the trailer and there has been no settling. Highly recommend this if you don't want the 2" lift. "Firetruckfreddy"