Talk to a Wrangler Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
Win $4,000! Enter Daily

How to Install Husky Rear Cargo Liner on your Wrangler

Installation Time

1 minutes

Extreme Terrain
Shop Parts in this Guide

Your new liner is custom molded to fit your Jeep Wrangler. Upon removal from the box your liner will not completely unroll and lay flat. This is normal and only temporary. Just place the liner on the floor or in the back of your vehicle with a weight in each corner (a book works well). After about 15 minutes, your liner will remain flat. In colder climates this “relaxing” may take longer; moving the liner inside will speed up the process.

Your liner is manufactured using an engineering resin that is lightweight and extremely tough and durable. The easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.

INSTALLATION INSTRUCTIONS FOR YOUR JEEP WRANGLER UNLIMITED CARGO LINER


NOTICE: IF YOUR WRANGLER UNLIMITED HAS THE OPTIONAL SUB-WOOFER MOUNTED ON THE PASSENGER SIDE PANEL IN THE CARGO AREA, YOUR LINER WILL NEED TO BE TRIMMED BEFORE INSTALLING. TO TRIM, CUT ALONG THE EDGE OF THE MOLDED STEP THAT RUNS ALONG THE RAISED RIB IN THE PART AS SHOWN ABOVE (ALSO SEE PHOTOS THE BACK OF THIS PAGE). THE DARKENED AREAS ABOVE ARE CARGO TIE-DOWN HOOK LOCATIONS. THESE CAN BE ACCESSED WITH THE LINER IN PLACE BY TRIMMING AWAY THE AREA INSIDE OF THE RAISED BAND.

TRIM ALONG THE OFFSET EDGE MOLDED INTO THE PART WHICH IS HIGHLIGHTED WITH THE DOTTED LINE. A UTILITY KNIFE OR HEAVY SHEARS WORK WELL FOR TRIMMING.


PHOTO SHOWING TRIMMED LINER INSTALLED IN A WRANGLER UNLIMITED WITH THE OPTIONAL FACTORY SUB-WOOFER.


LINER SHOWN TRIMMED TO ACCESS THE CARGO TIE-DOWN HOOKS AND ALSO TO ACCESS THE FACTORY CHILD SAFETY SEAT “LATCH” LOCATIONS ALONG THE FRONT WALL OF THE LINER. TO ACCESS THE LATCH AREAS, REMOVE THE MATERIAL FROM THE LOWERED AREAS.


HUSKY LINERS PRODUCT WARRANTY

Husky Liners guarantees to the original purchaser of Husky Liners products that they will not break or tear under normal usage during the life of the motor vehicle in/on which they are installed. This warranty shall only be effective while the original purchaser owns the motor vehicle and shall not apply to Husky Liners products that have been removed from the original vehicle on which they were installed. This warranty applies only to those parts that are correctly installed in/on the vehicle for which they were intended.

Husky Liners will warrant any part during the warranty period that proves defective in material and/or workmanship under normal installation, use, service, or maintenance. Return alleged defective part to the place of purchase for replacement or refund. Please have a copy of your purchase receipt available when you call. The foregoing is the only express warranty made by the manufacturer and is limited to the duration of this warranty. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. LABOR CHARGES, INJURIES, OR ANY OTHER LOSS OR DAMAGES WHATSOEVER, INCLUDING THOSE INCURRED IN INSTALLATION ARE EXCLUDED. ADDITIONALLY, PAINTING OF REPLACEMENT HUSKY LINER PARTS AND ANY VEHICLE COMPONENT REPAIR OR REPLACEMENT AS WELL AS INCIDENTAL DAMAGES ARE EXCLUDED.

This warranty is void for damages to the product due to misuse, abuse, neglect, accident, improper installation or any use that violates the instructions furnished by us.

ABNORMAL WEAR AND TEAR ARE NOT COVERED UNDER THIS WARRANTY. Obviously, if your dog chews up your Husky Liner product, it's not covered under the warranty. Likewise, if you shut your Husky Liner in the door of your vehicle, damage to the liner and/or door are not covered. Commonplace, everyday wear on a particular product is considered normal, and is not covered under warranty repair.