Installation Time
(approx) 30 Minutes
Difficulty Level:
Simple installation for anyone.
Installation Guides
No guide available for this part yet.
FREE 1 to 3-Day Delivery on Orders $119+ Details
Add Details
Verify parts fit & get product recommendations
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$219.99 each
Saved - View your saved items
We're sorry. We couldn't save this product at this time.
or use
Features, Description, Q&A, Specs & Installation
Brand | Heretic Studios |
Bulb Type | LED |
Light Shape | Rectangle |
Light Size | 2 to 2.75 Inch |
Versatile Light. Add lights to your off-roading ride and be ready to dominate the trail with the Heretic Studios 2-Inch Amber LED Pod Lights (Flood Beam). This LED pod light has an amber lens and is 2 inches in size. It’s perfect for various applications, such as additional light for the bumper, ditch, chase, and roof racks. They’re IP68-rated and can withstand dust and water, guaranteeing long-lasting efficiency wherever you are and no matter the weather.
Quality Construction. This amber LED pod light’s housing is made from a single block of aircraft-grade 6061 aluminum. It’s been CNC-machined, and its seamless design guarantees the light’s durability. It also has self-regulating circuit boards that feature cooling fins for reliable heat transfer.
Installation. Putting this Amber LED Pod Lights on your ride is easy and requires no drilling.
Warranty. There is no warranty for this product.
Application. This Heretic Studios 2-Inch Amber LED Pod Lights (Flood Beam) fits universally without the need for major modifications.
Heretic Studios 50213
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Installation Info
Installation Time
(approx) 30 Minutes
Difficulty Level:
Simple installation for anyone.
Installation Guides
No guide available for this part yet.
What's in the Box
Aug 14, 2023
Review shared from Heretic Studios 4-Inch Amber LED Pod Light; Combo Beam (Universal; Some Adaptation May Be Required)
Bright
Lights are very bright. Doesn't come as a set. Didn't realize until after received. Not a bad install. Should have had another set of brackets for side screws.
Jan 19, 2023
Review shared from Heretic Studios 30-Inch Amber LED Light Bar; Spot Beam (Universal; Some Adaptation May Be Required)
Great light bar
Bright, simple to install, nice lighting distance. No complaints so far. Installed on CBI covert series bumper
Sep 23, 2023
Review shared from Heretic Studios LED Fog Light Kit; Amber Quattro Lens/Clear BA-2 Lens (21-25 Bronco w/ Modular Front Bumper)
Excellent build quality
Tape the lights to avoid scratches. They fill the opening. Place the lights at the rear most position on the brackets. Put them toward the front and they will contact the bumper opening. Use a 3/8 drive rachet with a short extension to remove the bolt at the inside position. This is the only bolt removed. The bracket orientation is for the rear edge curve to go up. This avoids installing the lights on the top of the bracket. Tighten the lights to where they will still move. (This allows final alignment). Use the 7/16 flat wrench for the final tightening. The spacer has the hollow side up so it slips over the factory-threaded screw. The outside screw holds the "other side" of the bracket. Run the harness in front of the battery and down in the opening. Then place it between the bumper and lower grill valence. This prevents it from getting in the way of the rod and latch for the hood. The factory switches make for an easy hook-up. Yellow wire for the clear and green and brown for the yellow light. It is best to use solder. The video shows just wiring them and using black tape.
Jun 6, 2023
Review shared from Heretic Studios Quattro Amber LED Pod Lights; Combo Beam (Universal; Some Adaptation May Be Required)
Heretic ditch lights
They fit well look good and work well I spent extra time running them through a relay otherwise it could have been done in an hour
Mar 28, 2023
Review shared from Heretic Studios Wiring Harness for Single 0 to 30-Inch Light Bar
Wouldn't plug into the light bar on bumper
Had to cut plug off bought harness and light and splice together