FREE 1 to 3-Day Delivery on Orders $119+ Details
Add Details
Verify parts fit & get product recommendations
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$219.99
Saved - View your saved items
We're sorry. We couldn't save this product at this time.
or use
Description, Q&A
Description. The Heretic BA-2 LED Light Pod - 2 Pack is our staple pod light pack used for various applications from an optimal chase light to a ditch light, A-pillar light and beyond. These high performance clear LED pod lights are designed and manufactured in the USA, housed in CNC machined aircraft-grade aluminum, and outfitted with best-in-class circuit boards that allow temperature control and long-lasting light. The BA-2 LED Light Pod - 2 Pack is recommended on the front or rear bumpers of trucks, jeeps, SUVs, and UTVS. They can also be used on the sides and rear of roof racks as a chase light. These light pods are best for clear night conditions.
Heretic Studios 50206
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Sep 23, 2023
Review shared from Heretic Studios LED Fog Light Kit; Amber Quattro Lens/Clear BA-2 Lens (21-24 Bronco w/ Modular Front Bumper)
Excellent build quality
Tape the lights to avoid scratches. They fill the opening. Place the lights at the rear most position on the brackets. Put them toward the front and they will contact the bumper opening. Use a 3/8 drive rachet with a short extension to remove the bolt at the inside position. This is the only bolt removed. The bracket orientation is for the rear edge curve to go up. This avoids installing the lights on the top of the bracket. Tighten the lights to where they will still move. (This allows final alignment). Use the 7/16 flat wrench for the final tightening. The spacer has the hollow side up so it slips over the factory-threaded screw. The outside screw holds the "other side" of the bracket. Run the harness in front of the battery and down in the opening. Then place it between the bumper and lower grill valence. This prevents it from getting in the way of the rod and latch for the hood. The factory switches make for an easy hook-up. Yellow wire for the clear and green and brown for the yellow light. It is best to use solder. The video shows just wiring them and using black tape.
Aug 14, 2023
Review shared from Heretic Studios 4-Inch Amber LED Pod Light; Combo Beam (Universal; Some Adaptation May Be Required)
Bright
Lights are very bright. Doesn't come as a set. Didn't realize until after received. Not a bad install. Should have had another set of brackets for side screws.
Jun 6, 2023
Review shared from Heretic Studios Quattro Amber LED Pod Lights; Combo Beam (Universal; Some Adaptation May Be Required)
Heretic ditch lights
They fit well look good and work well I spent extra time running them through a relay otherwise it could have been done in an hour
Mar 28, 2023
Review shared from Heretic Studios Wiring Harness for Single 0 to 30-Inch Light Bar
Wouldn't plug into the light bar on bumper
Had to cut plug off bought harness and light and splice together
Jan 19, 2023
Review shared from Heretic Studios 30-Inch Amber LED Light Bar; Spot Beam (Universal; Some Adaptation May Be Required)
Great light bar
Bright, simple to install, nice lighting distance. No complaints so far. Installed on CBI covert series bumper