Hazard 4 Beavertail Pillbox and Blastwall MOLLE Cargo Panel; Grayman

Use the Beavertail to greatly expand the modular capabilities of our hardshell Pillbox™ or Blastwall™ packs. Molle front allows for the attachment of various pouches, while the fuzzy loop area allows for customization with any of our morale patches. Use our separately sold HardPoint® Screw & Nut Set and HardPoint® Stop Gap to screw into hard point system holes (requires 8 screws & 4 backers). Straps are adjustable for holding down loads. Can also secure bump-helmets and other gear underneath.

_ requires 1x HardPoint® Screw & Nut Set (8 screws total) and 2x HardPoint® SG-1 (4 backers total)
_ pocket size: ~8" x 7" (~20 x 17 cm); pocket opening: ~ 5.5" (~14 cm).
_ To install both the Beavertail and the rails: You would need to attach the two items to the pack without the stop gap kit. The nuts are big enough that they won't slip through the holes on the inside of the packs and with both items there is no need to fill in space with the SG1s.
_ molle & fuzzy loop field for hardshell Pillbox™ or Blastwall™ packs_ adjustable straps for holding down loads
_ top unbuckles forming swing-down extension
_ outside zip and inside fuzzy loop flat-pockets
_ screws into hard point system holes
_ can hold bump-helmets beneath
_ requires 1x HardPoint® Screw & Nut Set (8 screws total)
and 2x HardPoint® SG-1 (4 backers total)
_ pocket size: ~8" x 7" (~20 x 17 cm); pocket opening: ~ 5.5" (~14 cm).
_ To install both the Beavertail and the rails: You would need to attach the two items to the pack without the stop gap kit. The nuts are big enough that they won't slip through the holes on the inside of the packs and with both items there is no need to fill in space with the SG1s.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov