How to Install GraBars Front Handles (97-06 Wrangler TJ) on your Jeep Wrangler

Later model TJ’s will require more modification if equipped with the plastic surroundings near the window frame. 

1. Before 

2. What comes with the GraBars Front Handles (97-06 Wrangler TJ)

3. GraBars Front Handles (97-06 Wrangler TJ) provided instructions

4. For the installation of GraBars Front Handles both T40 screws will have to be removed. The hole on the trim is round while the GraBars are a larger simi-square. This will require trimming so that the handle can sit flat.

5. Remove the 3 Philips screws holding the trim in place. 

6. Using a knife enlarge the area around where the handle will sit. The handle can be used as a template. 

7. Install the handle with the 2 T40 factory screws. 

8. Installation complete.

Installation Instructions Written by ExtremeTerrain Customer T. Boyer 12/26/2017